Santa Buckles
Showing all 7 results
-
Sale!
Buckle- Candy Cane & Snow Flake
$100.00$80.00Select options
Buckle- Candy Cane & Snow Flake
$100.00$80.00Custom Designed by Eileen Strom
Red Transparent Enamel over 18K Gold Plated Zinc metal buckle.
The candy cane, pine cones and snow flakes all have a nice inked design elements for contrast
Easy Care no tarnish finish. Tongue and tang design will fit FULL 4″ leather belt also available at this website.
We also have buckle and belt combos
5.5″ tall X 7.0″ Wide
-
Sale!
Buckle- Crystal Snow Flake- 2 Tone Gold and Rhodium Plated
$89.00$70.00Add to cart
Buckle- Crystal Snow Flake- 2 Tone Gold and Rhodium Plated
$89.00$70.00Crystal Snow Flake Buckle
5″ wide fits from a 4″ belt to a 3-1/2″ belt
18k gold-plated ring is 1.3″ wide, engraved with a wind and snow flake pattern. The 3.4″ diameter snowflake is lightly textured and is plated with a shiny, rhodium finish. It will not tarnish.
There is a 20mm natural cracked quartz crystal in the center and it closely resembles ice.This Santa belt buckle has a ball and post closure.
Designed by Stephen Arnold.Approx. 5mm thick, this is a durable buckle with heavy plating. Dimensions: 5″ in diameter, this buckle is not so heavy as to strain your belt loops, weighing about 10 oz. Made out of quality zinc alloy and plated 18K gold and Rhodium for shine and easy upkeep.
We also offer a beautiful matched styling hat pin or brooch and buttons to match.
-
Sale!
Buckle- Holly Leaf- M 34 Rhodium Plated
$79.00$69.00Add to cart
Buckle- Holly Leaf- M 34 Rhodium Plated
$79.00$69.00This rhodium-plated Santa belt buckle is designed to accommodate a full 4-inch leather belt. Inspired by the 1994 Miracle on 34th Street movie, this all-metal buckle has lightly rounded corners buckle corners and has a slight cookie-zone curve to add comfort to the fit. Approx. 5mm thick, this is a durable buckle with heavy plating and a light satin finish to the background with highly polished rope-style trim and holly leaves and berries. Coordinates nicely with our Santa's Special Reindeer Button set, in either gold or rhodium finishes. Dimensions: 6″H x 4.75″W. Weight: about 10 oz. Designed by Stephen Arnold
-
Sale!
Buckle- Prancing Reindeer-3.375 to 3.875 inch belt
$89.00$59.00Add to cart
Buckle- Prancing Reindeer-3.375 to 3.875 inch belt
$89.00$59.00The Prancing Reindeer Buckle is finely cast in solid zinc alloy, then nickel plated, and finally gold-plated with a antique stain applied to the recessed areas. This artful design depicts one of Santa’s reindeer, surrounded by a ring of harness and sleigh bells.
NOTE: DO NOT USE THIS BUCKLE ON A 4 INCH BELT. WARNING IT WILL BREAK THE BUCKLE.This buckle design is approximately 4.5″ tall and wide and can accommodate up to slightly less than a 4″ wide belt, (do not use a four-inch belt as the attachment bar is likely to break and will not be warrantied). It can use smaller belt widths all the way down to 3.375″ widths (even 3 1/4, but a tiny bit will show through). Although it has a loop bar closure on the back side (pictured) for a ball and post closure, it will also fit on a traditional one prong tongue and tang belt. Designed and created by Steve Pulera for Claus Creations by Eight Tiny Reindeer.
Be sure to look at the related products tab below to view the matching 2-inch Prancing Reindeer Brooch. A perfect addition to Santa’s hat, vest or to a Mrs. Claus cape or blouse.
-
Sale!
Buckle- Reindeer Profile
$125.00$100.00Read more
Buckle- Reindeer Profile
$125.00$100.00The Reindeer Profile Buckle.
Designed and created by steve Pulera for Claus Creations by Eight Tiny Reindeer
Within this innovative buckle, Steve incorporated Santa’s reindeer and sleigh bells. It is a traditional belt buckle with tongue and tang closure. The buckle is cast in quality zinc alloy, and then heavily gold plated for a tarnish-free finish. Not for someone looking for a petite buckle, this one is massive, but beautiful – approximately 5.625″ tall and 8.5″ wide. It is made for use with a full 4″ wide belt, and curved from left to right to accommodate Santa's “cookie zone.” Please note: This is a large, some say – mammoth, and very heavy (about 19 oz) buckle which requires support with ample belt loops on your suit.
Santa's Clauset is proud to be an authorized distributor of Claus Creations/Eight Tiny Reindeer products.
Out of stock
-
Sale!
Buckles- Rein Deer Wreath For 3.5″ & 4″ Belts
$90.00$85.00Add to cart
Buckles- Rein Deer Wreath For 3.5″ & 4″ Belts
$90.00$85.00Belt Buckle- 4 inches
The Reindeer Wreath Buckle is Steve Pulera's latest design. This Santa buckle is finely cast in solid zinc alloy, then double gold-plated for a quality, durable, no-polish finish. This artful design depicts one of Santa’s reindeer, surrounded by a detailed Christmas wreath.
This buckle design is approximately 5.25″ tall and wide and can accommodate up to a full 4″ wide belt. It can use smaller belt widths all the way down to 3.25', however, you will have show-through of the background. Although it has a loop bar closure on the back side (pictured) for a ball and post closure, it will also fit on a traditional one prong tongue and tang belt. Buckle shown on Amish hand-crafted 4″ latigo leather belt, available here. Designed by Steve Pulera for Claus Creations by Eight Tiny Reindeer, it was produced and is co-distributed by Fabled Santa Industries. There are also matching Brooch/Pin and buttons 1.25″ available for sale
Santasclauset.org is proud to be an authorized distributor of quality Claus Creations/Eight Tiny Reindeer products.
2 in stock
-
Sale!
Buckles-Holly Leaf M 34 Gold Plated
$89.00$79.00Add to cart
Buckles-Holly Leaf M 34 Gold Plated
$89.00$79.00Belt Buckle- 4 Inch
Buckle is 6-inches tall and 4.75-inches wide with approximately a 1-inch frame, making the center opening 4.125-inches x 2.75-inches. Weight is almost 10oz. It is 18K Gold Plate. The buckle is inspired by the 1994 Miracle on 34th Street Movie
See Insert picture for detail of workmanship
This all metal buckle has lightly rounded corners buckle corners and has a slight cookie-zone curve to add comfort to the fit. Approx. 5mm thick, this is a durable buckle with heavy plating and a light satin finish to the background with highly polished rope-style trim and holly leaves and berries. Designed by Santa Stephen Arnold
